Project management
it is necessary to provide the process and activity of planning, organizing, motivating, and controlling resources, procedures and protocols to achieve the client's specific goals. Our project manager is often a client representative, who has to determine and implement the exact needs of the client. Many variable factors exist in a seismic project, resulting in significant investment risk. Our project management is able to minimize that risk. The project manager’s role varies from project to project but typically encompasses the following:

Fully understanding our client’s requirements.

Ensuring that contractor in the field fulfils the contract between itself and the client.

Monitoring cost versus efficiency each day to ensure that the project remains on track and to mitigate at times of underperformance, preventing further failure.

Advising on the selection of effective contractor personnel.

Continually monitoring the suitability of the geophysical acquisition parameters as the acquisition progresses to different parts of the prospect when the geology, topology and environmental conditions sometimes change.

Constantly checking data quality, HSSE performance and goals and all of this through communicating effectively and frequently with both the contractor and our client in person as much as is practicable The ability to adapt to the various internal procedures of the contracting party, and to form close links with the nominated representatives, is essential in ensuring that the key issues of cost, time, quality and above all, client satisfaction, can be realized.

Land seismic acquisition QC/QA:
Our acquisition QCs operate in 2D, 3D, and 4D land environments, as well as transition zone and land VSP surveys. QA/QC for land acquisition is the combination of quality assurance, the process or set of processes used to measure and assure the quality of a product, and quality control, the process of meeting products and services to consumer expectations. Quality assurance is process oriented and focuses on defect prevention, whereas quality control is product oriented and focuses on defect identification. Our land acquisition QC/QA has responsibility for the overall quality of the seismic and positioning data. In addition to this role, they often also adopt an HSSE QA/QC role, in place of a reserved HSSE consultant. A QC/QA has deep knowledge of positioning control and geophysics, as well as field experience. They are able to understand a project holistically, knowing how each factor will affect the final dataset and to what extent. An acquisition QC/QA will increase the value of the data, not just by being an extra pair of eyes and ears, but by bringing know-how from other surveys, and from working with major operators. The experience our QC/QA offers will also benefit the contractor, especially the less experienced ones, as many potential errors do not have to be learnt firsthand, at cost. The consultant is also quickly aware and can issue suitable warnings, should activities begin to stray from optimum. Before the start of your survey, our acquisition QC will offer to meet face-to-face with the client. This will allow the best understanding of the client's objectives and the contractor’s capabilities, so that potential technical, logistical, and HSSE difficulties can be pre-empted and avoided.
Positioning QC/QA & surveying:
Positioning QC/QA & surveying The Geo People provides survey QC/QA services for land 2D, 3D and 4D land, TZ seismic and onshore pipeline inspection. For seismic acquisition, navigators and engineers need to know their position with absolute accuracy. Our positioning QC/QA consultant for land and transition zone survey has responsibility for checking the position of the seismic data. They will also verify start-up procedure and check the preliminary and final SPS data, prior to its final acceptance by the client. On 2D land surveys, the survey QC frequently oversees the construction of GPS control networks using RTK GPS methods to enable the accurate positioning of any wells before plotting the designed program lines, relative to the true well positions.

Seismic data processing & QC/QA for land
Seismic data processing & QC/QA for land As well as land and TZ field seismic processing QC, The Geo People provides specialist seismic processing, seismic data processing QC, and in-house seismic processing management QC. The sequence of events in seismic processing are split into three areas namely, deconvolution, common mid-point (CMP) or common depth point (CDP) stacking and finally, migration. Deconvolution, the process which reduces the received wavelet to a spike, increases the resolution of the seismic data and attenuates short period multiples, exposing the first reflections. The multisampled data is averaged in the stacking process and finally, in migration, the data are re-positioned to the place where it originated from as opposed to where it was recorded at the surface.


Knowledge of the geology before the survey takes place and having the presence of a geophysicist QC in the field enables the client to obtain migrated data in areas of importance prior it to all being processed months later by a processing house, saving the operator much time. In land seismic data processing (unlike marine), static corrections have to be applied to account for the differences in height between the source and receiver positions. Later, further residual statics corrections have to be made to compensate for the variable velocity of sound in the near-surface, all important to get right in the field. To make seismic processing as cost-effective as possible, we need to look briefly at three main seismic data processing methods, namely: • Deconvolution, which aims to reduce the received seismic wavelet to a spike effectively increasing the resolution of the seismic data and attenuating short period multiples • Common-mid-point (CMP) stacking (also referred to as common-depth-point or CDP stacking), which attempts to average out the multi-sampled data • Migration, which re-positions the seismic data to the point where it was reflected from as opposed to a point below the common mid-point position The deconvolution and stacking processing is best conducted out in the field, as the logistics are easier and also allows the processing flow to feed back quickly, to improve the survey process. The migration processing will normally take place after the survey. However, if the contractor has suitable facilities and the client representative is sufficiently qualified and experienced then another, quicker form of migration processing can also take place out in the field when the survey is still on-going, in the form of a smaller migrated cube. This can save time and expense for the operator, as the rig plant can be approximately positioned, prior to the full survey result, instead of the operator having to wait for the off-site migration processing to be fully completed. The degree of the complexity of seismic processing acquired by the operator in the field is dependent on the processing capability of the contractor, the skill levels of the contractor (and independent consultant), and the readiness of the operator to invest in this process. Seismic processing is one of the biggest reasons for time delays faced by operators before making decisions on where to drill. The actual cost depends on the physical processing power required to compute the enormous amount of data, making the right choices for processing and effective supervision, thus ensuring that whole batches of data do not to have to be re-processed.

Technical audits for land

• Improvement in internal control systems to mitigate the potential risk
• Assurance of revenue
• Transparent and cost-effective procurement of goods and services
• Maintenance Services
• Transparent and cost-effective procurement of goods and services
• Transparent and cost-effective procurement of goods and services
• Reduction of project cost and annual operating cost

Solar Energy – introduction
Solar energy is the energy obtained by capturing heat and light from the Sun. Energy from the Sun is referred to as solar energy. Technology has provided a number of ways to utilize this abundant resource. It is considered a green technology because it does not emit greenhouse gases. Solar energy is abundantly available and has been utilized since long both as electricity and as a source of heat.

Solar technology can be broadly classified as the following:
• Active Solar − Active solar techniques include the use of photovoltaic systems, concentrated solar power and solar water heating to harness the energy. Active solar is directly consumed in activities such as drying clothes and warming of air.
• Passive Solar − Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light-dispersing properties, and designing spaces that naturally circulate air.

Conversion of Solar Energy
The solar energy is the energy obtained by capturing heat and light from the Sun. The method of obtaining electricity from sunlight is referred to as the Photovoltaic method. This is achieved using a semiconductor material. The other form of obtaining solar energy is through thermal technologies, which give two forms of energy tapping methods.
• The first is solar concentration, which focuses solar energy to drive thermal turbines.
• The second method is heating and cooling systems used in solar water heating and air conditioning respectively.

The process of converting solar energy into electricity so as to utilize its energy in day-to-day activities is given below −

• Absorption of energy carrying particles in Sun’s rays called photons.
• Photovoltaic conversion, inside the solar cells.
• Combination of current from several cells. This step is necessary since a single cell has a voltage of less than 0.5 V.
• Conversion of the resultant DC to AC.

Seismic explosive services
Select Serve Company has ability to provide various Seismic explosive to the international seismic companies are operating in Kurdistan Oil & Gas fields with storage service capacity up to 500 tons at any giving time that are approved by Kurdistan Regional Government. .

Using explosives:
• Using explosives as seismic sources has been in practice for decades because of the reliability and energy efficiency they provide. Such sources are most commonly used on land and swampy environments because of high thickness in sediments.

Gelatin Dynamites
• Explosives most widely used as seismic sources are known as gelatin dynamites. These dynamites are placed into three subcategories, straight gelatins in which nitroglycerin, also known as glyceryl trinitrate with the chemical formula C3H5(ONO2)3 is the active component, ammonia gelatins in which ammonia nitrite with chemical formula NH₄NO₃ as the active component, and semi gelatins in which the composition consists mostly of nitroglycerin.

Upon Detonation
• Upon detonation, explosives release large volumes of expanding gas very quickly, forcing great pressure to the surroundings in the form of seismic waves.

Seismic explosive services

• Explosive Importing Services
• Explosive Storage Services
• Explosive Transporting Services
• Local and skilled workforce hiring Services

De-mining , UXO Service
Select Serve have specializes in conducted demining operations and land remediation with number of certification aworded to our senior staff from Mine Action Agency in Northing of Iraq (GDMA), United States Army 2nd Armored Cavalry Regiments in 2004, Mines Advisory Group in 1994 to 1997, As all our staff had been trained by (UNOPS),(MAG),(NPA),and (GDMA) according to international mine action standard (IMAS), and technical safety guideline (TSG). They had been trained on mine clearance (EOD), (MRE), and management. .

De-ming Operations:
• a full array of management, training, administration, logistics, procurement, technical,equipment supply and these activities has revolutionized the systematic process of locating and neutralizing these threats.

Our experience includes
• Our experience includes,Collaborative Methodology, Our approach to clearance merges manual deminer, mine detection dog, and mechanical technology. Deployed teams of technical advisors are responsible for coordinating with our energy client officials, directing logistical support, and taking care of day-to-day mine clearance operations.

De-mining , UXO Service services

• De-mining Operations & land Remediation Services
• De-mining Technical Advisors Services
• De-mining Detection Dog Services
• De-mining Mechanical Technology Services
• Local and skilled workforce hiring Services

Cargo & Unlimited Dynamics
At Select Serve, we understand that your daily business and trade activities depend on punctuality. To support your goals, we guarantee on time delivery to any destination worldwide when you use our air freight services. We handle your shipments in accordance with your individual requirements. Working with our global network of staff, partners, and subcontractors, we can offer the best rates and services for all your air freight shipments. Our teams around the world are committed to ensuring that your goods reach their destination safely, cost efficiently, and on time.

Customer Services:
• We know how challenging it is to meet your customers’ product quality standards, manufacturing specifications, and delivery deadlines. Our experts are here to take responsibility for door-to-door transport of your air freight, including appropriate customs clearance procedures. This leaves you free to direct all your energy and attention to running your business and focusing on your own profitability and growth.

Advantages of working with Select Serve include:

• Single point of contact
• Specialists available 24/7
• Handling of dangerous cargo
• Door-to-door service
• Consolidation and direct loading
• Customs brokerage
• Individual global network
• Tracking and tracing
• Optional cargo insurance

Heavy Cargo and global logistics shipping
When you are responsible for transporting heavy goods, large machine components, production lines, entire factories, or goods of great value, it is essential to have a reliable partner by your side who adopts your project as their own.

First Class Service
Select Serve offers you First Class Service based upon our many years of experience in project forwarding. The commercial know-how of our specialists will ensure the smooth coordination of your bulk shipments with great personal dedication and commitment. Our team is here to work alongside you to guarantee that your project runs smoothly and is completed on schedule.

Heavy Cargo and global logistics shipping Services

• Machine and plant Transportation
• Heavy and special haulage
• Multimodal transport by land and sea
• Full and partial chartering for air freight
• Shipping of conventional cargo
• Provision of cranes including mobile cranes up to 500 tons